Download >> Download Semi rigid cable assembly instructions


Read Online >> Read Online Semi rigid cable assembly instructions

http://dkp.cloudz.pw/download?file=semi … structions


how to connect sma connector to cable

sma crimping tool

how to assemble sma connector

sma connector assembly instructions

sma crimp plug rg174

how to solder sma connector

sma connector datasheet pdf






Assembly. Instructions. SMA RIGHT ANGLE SOLDER. TYPE PLUG FOR SEMI-RIGID CABLE. 1. Identify connector parts. (2 piece parts). 2. Strip cable to dimensions shown. Do not nick center conductor during strip operations. 3. Insert cable into body making certain that the cable insulation bottoms on the center contact.
Preparation of cable. (1) Strip cable to recommended dimensions shown in catalogue. (2) Remove any burrs from jacket and center conductor. Semi-rigid cable direct solder(1). Solder center contact to cable center conductor. (1) Solder center contact to cablecenter conductor. (2) Remove all excess solder. Attach cable to
5285-5CC Center contact is captivated. SMA Semi-Rigid Cable Connectors. 5319-0-1. SMA male anti-torque nut to O .141. Semi-Rigid cable (no contact). Refer to Assembly Instruction 123 on page 198. Refer to Assembly Instruction 222 on page 206. Consult factory for Assembly Instructions. Refer to Assembly Instruction
Cable Assembly Instructions-Solder(Semi-Rigid) · Cable Assembly Instructions-Crimp/Crimp · Cable Assembly Instructions-Solder · Cable Assembly Instructions-FCP
24 Aug 2011 This may be a useful resource if you find that you need to make a semi-rigid or flexible cable with SMA connectors on the ends; you may have the parts but no instructions on what to do with them. The information is undoubtably related to Amphenol's connectors but it may be applicable to other brands such
NOTE. Tool directions in this document are for reference only. Refer to the appropriate connector assembly instructions to ensure proper assembly. Refer to Figure 2 for connector assemblies and their associated instruction sheets. SEMI-RIGID CABLE CONNECTORS. FLEXIBLE CABLE CONNECTORS. CONNECTOR.
In its most basic form, a semi-rigid cable assembly is a coaxial transmission line consisting of a metal tube, typically made from copper which forms the outer conductor with a metal wire conductor running down the center of the tube. The center conductor is supported by a dielectric material that keeps the wire centered in
15 Dec 1997 Amphenol's soldered style coax interconnection system, designed for semi rigid coax wire styles RG 405 and M17-151-00001. 4. Other coax wire styles may also be used with Amphenol's coax interconnection system. Consult factory for assembly instruction on coax wire styles not referenced in this
The SMA type se mi—rigid cable assembly kit( Figure 2 )are available for installation of SMA connectors with .085-inch and .141-inch diameter semi-rigid cable in ?eld or lab. For other types of connector attachment with semi-rigid cable, this similar tool kit also could be used. FIG 1. CRIMP PLIERS FIG 2. SEMI-RIGID CABLE
     

Код:
http://zkrkuzc.rubb.tk/viewtopic.php?id=17 http://afuwtoh.bigforum4you.com/t75-Knit-baby-booties-instructions.htm http://fanclub.quiho.com/blogs/entry/Comnavsurfor-instruction-4400-1 http://www.codesend.com/view/171a24fabd405685ab4d85c988faa57d/ http://mdbllpe.anime-ff.ru/viewtopic.php?id=152